Category Archives: New Products

Savant Introduces WiFi Enabled Digital Thermostat

Savant Systems, LLC has introduced the Savant Wireless Thermostat, SST-W100. 
Savant Wireless Thermostat
The SST-W100 is a WiFi enabled digital thermostat designed to control Heating, Ventilation and Air Conditioning (HVAC) systems within any residential or commercial setting and integrate seamlessly into a Savant-controlled environment. The SST-W100 is a versatile thermostat for one and two stage control of forced air, radiant, heat pump and HVAC systems. 

The Savant SST-W100, requiring only standard thermostat wiring at its mounting location, is ideal for retrofit installations thanks to its wireless communication to Savant’s SmartSystem controllers. The SST-W100 provides access to temperature adjustments from anywhere in the home or from a remote location using any Savant interface. Multiple Savant thermostats may be networked over an existing WiFi network, enabling temperature and humidity adjustment from any SST-W100 in the home. Energy conservation is achieved by programming the HVAC system (using the HVAC Scheduler within the Savant TrueControl iPad app) to automatically respond based upon outside temperature, season or time of day.
 
“A wireless thermostat solution increases installation efficiency and flexibility for integrators while enabling them to give their customers one-touch access to personalized heating and cooling schedules,” said Jim Carroll, executive vice president of corporate strategy and business development at Savant. “We made the SST-W100 easy to operate, with a large LCD display and nicely spaced pushbuttons for users to access temperature and humidity readings, set point adjustments, system mode/fan status indicators, and setup menus.” 

Up to two optional remote temperature sensors (sold separately) can be connected to the SST-W100 for enhanced flexibility and optimized performance when required. Climate can be regulated according to the average of multiple sensors or the built-in sensors within the thermostat can be disabled entirely to allow the SST-W1000 to be installed out of sight.

Harman JBL Introduces Everest DD67000 Flagship Loudspeaker

Harman’s JBL has introduced its new flagship Project Everest DD67000 loudspeaker, incorporating a host of upgrades.
Everest DD67000 loudspeaker
The DD67000 features new woofers, a refined crossover network and additional improvements to deliver musical accuracy.

“Our previous Project Everest DD66000 was a landmark sonic achievement,” said Jim Garrett, director of marketing and product management, Harman Luxury Audio Group and Loudspeakers. “However, in the six years since it was introduced, the Harman team in Northridge have not stood still. We have continued to advance the design to push the performance threshold of this class leading speaker, resulting in significant performance improvements that is sure to thrill the most veteran audiophiles and passionate music lovers.”

The Project Everest DD67000 is striking in appearance, the company says, blending classic JBL design elements that are evocative of the company’s Hartsfield and Paragon loudspeakers with contemporary styling. The DD67000 retains curved and angled surfaces of its predecessor and a dramatically flared midrange horn, complemented by the loudspeaker’s rosewood finish with the addition of a new carbon-fiber baffle trim panel and elegant rosewood and maple finishes.

The DD67000 is equipped with two of the new 1501AL-2 cast-aluminum-frame woofers, featuring a three-layer laminated cone construction comprised of an inner and outer layer of pure pulp stock with an inner foam-injection-material core. This woofer cone combines high rigidity and fast response for taut, articulate, low frequency with extension down to 29 Hz (-10dB anechoic). Performance is further improved by the 1501AL-2’s newly designed accordion-pleated poly/cotton surround, yielding a woofer with a fundamental resonance that is 10Hz higher than previously for improved agility and “snap” and a more consistent tonal balance at any volume. Additional features include a massive 4-inch voice coil immersed in an Alnico 5DG magnet that is immune to temperature changes, a copper-steel-laminated top plate that contributes to more linear magnetic behavior within the driver, and additional details.

The 476Be midrange/high-frequency compression driver utilizes a 4-inch, pure-beryllium diaphragm that is formed as an integral one-piece diamond-embossed surround and dome. The 476Be also features a 4-inch aluminum edge-wound voice coil, a rapid-flare coherent-wave phasing plug, a pure-copper-sleeved polepiece that maintains maximum magnetic gap flux and other enhancements to deliver extraordinary transparency and natural vocal and instrumental reproduction.

The DD67000’s 045Be-1 ultrahigh-frequency compression driver uses a 1-inch beryllium diaphragm and 2-inch neodymium magnet to produce frequency response beyond 50kHz. The driver features a new precision-cast, pure-magnesium phasing plug that offers better heat dissipation for improved clarity even at higher volumes, and improved manufacturing processes have enabled the driver to provide nearly 5dB more output above 30kHz.

Both compression drivers are mounted in JBL’s computer-optimized Bi-Radial horns that are made from the company’s acoustically inert SonoGlass material, eliminating the unwanted strident colorations that can occur with conventional horn designs. The horns are shaped to provide optimum dispersion in the horizontal and vertical planes, for smooth frequency response and precise imaging over a wider on- and off-axis area.

The Project Everest DD67000 employs a unique crossover network. It is designed to let the woofers operate in different frequency ranges, which provides optimum directivity and high output. The crossover network uses a DC bias system that keeps the capacitors operating in Class A mode, yielding maximum sonic purity. The network is comprised of four separate circuit boards—one for each transducer—to optimize each board for each driver and its corresponding frequency range.

The DD67000’s performance can be fine tuned for any system and room thanks to its front-mounted control panels that enable precise adjustment of low-frequency and high-frequency level and other characteristics. The JBL Project Everest DD67000 is built with top-quality components including air-core inductors, polypropylene foil capacitors, wire-wound and metal oxide resistors used in multiples to prevent value shift during high-power operation and more.

LG 84LM9600 Ultra HD TV

This TV is kind of a big deal, and I don’t say that just because it’s six feet wide. The new LG 84LM9600 is the world’s first Ultra HD (formerly known as 4K) 3D smart TV.

LG 84LM9600 Ultra HD TV

Because production quantities are understandably low, and this is a pricy set, it was easier for me to go to the TV rather than for the TV to come to me. I spent several hours alone with the TV and my test gear at LG’s Chicago headquarters.

Ultra HD TVs have a resolution of at least eight million active pixels – 3,840 horizontally and 2,160 vertically in a 16:9 aspect ratio – which is exactly the resolution of this model (as well as the Sony model that is also just hitting the market).

This is LG’s flagship model, so it carries a price of $19,999, though retailers are selling it for a minimum advertised price of $16,999.

The 84LM9600 includes all of LG’s top TV features, including the smart TV platform, the gyroscope-like Magic Remote (with voice features), built-in Wi-Fi and a pretty good audio system. It also comes with a standard remote. It wears an attractive, fairly narrow bezel for a TV of this size and is only a hair over 1.5 inches thick. Sharp’s 80-inch 1080p TV models are more than three inches thick.

That slim depth is a result of LG going with an edge-lit design rather than a full-array LED design, which Sharp uses in its big TVs. Edge-lit LED TVs are thinner, but they can suffer from some light blooming and uniformity issues that don’t plague full-array models.

Like all LG 3D LCD TVs, this one uses passive 3D with polarized glasses (no battery or LCD lenses). The TV comes with six sets of 3D glasses.

The LG Ultra HD comes with a small, but very sturdy-looking table stand that permits it to swivel to either side. A swivel stand is unusual in the massive class of TVs, and this one swivels remarkably well – you’d hardly guess by how easily it moves that the TV weighs 150 pounds (Sharp’s 80- and 90-inch TVs actually weight just a bit less than this).

Another issue with edge-lit TVs is their inability to locally dim the LEDs nearly as well as full-array sets. LG and other companies do employ an edge-based local dimming technology, and I’ll discuss that a little later. Again, for comparison, the big Sharp TVs do not use local dimming, but the Sharp Elite brand TVs do. (Note: I use the Sharp 80- and 90-inch TVs as a reference only because they are the closest comparable in size. Being 1080p TVs, they are considerably cheaper, but also a different technology class).

Big TVs are fun – who doesn’t love a TV that makes the neighbors’ jaw drop? But arranging a room around a TV this big raises particular issues, especially seating distance. Using the THX seating distance formula (diagonal screen size divided by .84) gives us an ideal seating distance of 8.3 feet. That might seem a bit close, especially if you’re using a 1080p TV, but with Ultra HD resolution, you can actually sit much closer (the THX calculator is for determining an immersive viewing field, and does not necessarily take screen resolution into account).  Most living rooms will put a little more distance between the TV and the sofa, so I set myself up at 10 feet.

Basic Calibration

I started off digging into the TV’s menu and doing a basic calibration. The TV has a variety of pre-set video modes, including a Cinema mode that came very close to the final value after my own calibration. It also includes a feature called Picture Wizard II, which guides you through a set of images to help you properly set the TV to your preference. I’ve used it before, and it works well. In addition to the basic controls, LG includes advanced features like Dynamic Contrast, Super Resolution, Color Gamut, MPEG Noise Reduction, Black Level, Dimming Level and TruMotion (a 240Hz refresh rate processor). This set also offers full ISF day/night modes. For some reason the advanced picture settings are divided into two menus: Expert Control and Picture Options. This can make finding the feature you want a little difficult.

After finalizing my settings, I ran through several Blu-ray discs of test patterns. On dark fields I could clearly see some light blooming around the edges from the edge-mounted LEDs. This was most noticeable on the lower right and top left corners. When a bright white element was added to the scene, I could see some light leakage affecting an area around the bright element – I was able to improve that by engaging the local dimming (which seemed to work best on Medium setting). I was told that the set had 16 dimming zones. Light issues are prevalent on every LED LCD TV, especially edge-lit ones, which comprises most of the market. You don’t encounter this on plasma T Vs, but there are no 4K plasma TVs. Among other edge-lit TVs, the blacks on this set mostly looked pretty good. On real content material, the light bleeding was minimal and not enough to be a distraction unless you tend to be fanatical about that kind of thing.

I did see some slight uniformity issues which appeared as barely noticeable bands. The only time I saw this was during very bright scenes in the disc The Art of Flight. I’ve seen this issue before on TVs, and it seems to be associated with edge-lit LEDs. This was not a major issue, and if you weren’t looking for it, you’d probably miss it. On other test patterns, like color, motion and deinterlacing, the TV performed very well.

Best 3D on TV

I switched to some 1080p Blu-ray movies. First up was Tron: LegacyThe scenes in this movie are almost all dark, and the light issues were not apparent accept in the top and bottom black bars of the Cinemascope feature. I watched clips from several other 1080p movies, including The Dark KnightAvatar and The Art of Flight. While the Ultra HD upconversion didn’t necessarily make the 1080p video look any better (it didn’t make it worse), it eliminated any pixel structure unless you were practically leaning on the TV. It’s quite impressive to sit five feet away from a TV that’s six feet wide and still see a perfectly smooth image.

Next I switched to 3D mode. I’ve been a fan of passive 3D because the cheap, lightweight glasses make 3D a little less of a burden than active shutter glasses, but the system has a significant flaw. With 1080p TVs, polarized glasses cut the resolution in half so you end up watching less than high definition. It doesn’t look bad, but the picture isn’t as crisp as the full HD view you get with active shutter glasses.

Ultra HD TVs turn that upside down. With an Ultra HD TV, the passive glasses still cut the resolution in half, but you’re starting with double the resolution (because the TV upscales the 1080p signal). When the glasses divide up the left and right image you’re still getting 1080p in each eye, but without the flicker and irritation sometimes encountered when wearing active shutter glasses.

All of the above was preparation to report that this TV displayed the absolute best 3D I’ve ever seen on a television. I watched segments from a few 3D Blu-ray discs, but IMAX Under the Sea was the most impressive. The image was completely natural and realistic. In one scene a large grouper swims up close to the camera, and I could swear the fish was three inches from my nose. The illusion was that convincing. Other, less dramatic scenes still produced a depth and clarity that was stunning.

After all the 1080p material, which is what most buyers will watch on this set, I switched over to some Ultra HD video LG supplied on a hard-disc server. These clips were mostly landscape shots of attractive cities and towns around the world, and they all looked amazing. From 10 feet the resolution shouldn’t have made much of a difference, but the effect was more subtle than just more pixels – it created the closest thing to looking through a clear window I’ve ever seen. A single 3D Ultra HD clip (this one animated) was also pretty amazing.

What’s Next for Ultra HD?

So is Ultra HD the future of television? Well, maybe, probably. How’s that for a firm answer? There are a couple of ways to look at this. First, Ultra HD is a natural progression from 1080p, and unlike some other TV innovations (3D), it is an actual improvement. More real pixels means more real picture information. But how many pixels are necessary for a given screen size? I honestly don’t think I can answer that for every person, but I can say that on this 84-inch TV, the extra 2,000,000 or so pixels made the picture more realistic, added depth and improved clarity, especially in 3D.

But what about 4K content? Sony is offering buyers of its 84-inch 4K TV a hard-disc server with ten Ultra HD movies, but Sony’s TV also cost $8,000 more than the LG unit. For now, this LG (and all the other Ultra HD TVs that will launch in 2013) will mostly be used for watching the high-definition sources you already have, and this TV does a good job of that.

Remember, TV broadcasters don’t even send out 1080p video. We already watch lots of 480p, 720p and 1080i content on 1080p TVs. An Ultra HD TV just upscales those lower-resolution signals even further to make them more viewable on a very large screen. Having a good built-in video processor and extra resolution improves the visual experience of plus-size TVs and dramatically improves passive 3D.

Marantz Launches Flagship AV Preamp Processor

Marantz is establishing a new top-end price point in tuner/preamp/surround processors with the shipment of the $3,599-suggested AV8801, which can be paired with the new flagship MM8077 seven-channel power amp at $2,399.

Marantz’s $3,599-suggested 11.2-channel AV8801 tuner/preamp/surround processor.


The 11.2-channel component joins the recently shipped $1,699 7.2-channel AV7701 and the $1,599 AV7005 preamp processors in the Marantz lineup of AV separates and exceeds the price of a previous flagship preamp processor, the $2,999 AV8003, which was discontinued a few years ago, a spokesperson said.

Compared to the AV7701, the flagship model adds AM-radio band and 4K up-scaling from standard-definition sources, not just from HDMI-connected sources. The flagship also offers 192kHz/32-bit processing compared to 192/24 processing. With the new preamp processor and amplifier, the brand’s line of AV separates consists of three preamp processors and three amps.

The new preamp processor is the brand’s first audio component with 11-channel capability and Marantz’s first component with DTS Neo:X post processing, which adds add two front-height and two front-width channels to a traditional 7.1 home-theater system. The 11.2-channel component supports Neo:X’s full 11.1-channel capabilities, whereas some Neo:X-equipped audio components in the industry support up to 9.1 Neo:X channels. The AV8801 is also Marantz’ first product to incorporate Audyssey’s XT32 room-equalization technology and Audyssey Sub EQ HT processing, which optimizes sound for dual-subwoofer setups. It’s also Marantz’s first audio component with four-port Ethernet switch.
Like the 7.2-channel AV7701 preamp processor, the flagship features DLNA 1.5 networking, AirPlay, HD Radio, Internet radio, 4K passthrough and up-scaling with GUI overlay, 3D passthrough, optional stereo Bluetooth, two simultaneous HDMI outputs, a third HDMI out for a remote zone, and Audyssey DSX post processing, which adds front-wide and front-height channels to a 5.1 system.
Both preamp/processors also stream photos and audio from networked PCs and connect to broadband modems to stream Internet radio stations, Pandora, SiriusXM Internet radio, Spotify and Flickr.

Sony Unveils 4K Server for 84-inch LCD TV

Sony Electronics formally took “4K Ultra High Definition” to the next level Thursday by introducing the first 4K playback device supporting its newly released 84-inch LCD TV.

The new 4K Ultra HD Video Player is a hard-disk server that connects easily to Sony’s matching XBR-84X900 84-inch LED LCD TV, allowing consumers to view 4K resolution movies and short-form 4K videos. The server and 84-inch 4K Ultra HD LED LCD TV sets were scheduled to be officially unveiled and demonstrated at an invitation-only event with Sony recording artist John Legend.

Sony said it is making the device available as a bonus “loaned”—as the company put it—exclusively to U.S. customers purchasing the Sony 4K LED TV. The hard-disk server, which has been used for in-store demos of the company’s flagship 4K Ultra HD TV screen, comes loaded with content, including both full-length Hollywood features and a gallery of videos, creating the first true home 4K experience, Sony said.

Currently, the device is the only method consumers can use to play natively produced 4K Ultra HD content on the new high-resolution displays. As a stand-alone unit, the Sony XBR-84X900 TV up-scales all video inputs, including the more than 7,000 Blu-ray Disc titles currently in distribution, to what Sony said is “a near-4K resolution” through the use of Sony’s proprietary 4K X-Reality PRO three-chip picture engine.

“Sony is a company of firsts, and this introduction of the first 4K technology platform continues that pioneering, innovative spirit,” stated Phil Molyneux, Sony Electronics president and COO. “We were the first to introduce 4K projectors to cinemas in 2005, the first to introduce a 4K projector designed for the home in 2011, and the first to offer a 4K up-scaling Blu-ray Disc player earlier this year. Now we’re the first to begin closing the content loop, offering native 4K content for the home and delivering the most immersive, awe-inspiring entertainment experience yet.” 

As it has done with high-definition and 3D, Sony is looking to take the point for the consumer electronics industry in leading the way into the next new video format. Sony pointed out that “it is uniquely positioned to be first to market in delivering 4K Ultra HD solutions,” in its multiple roles a content producers, and consumer and professional equipment manufacturers. Sony said its spin on the 4K Ultra HD Home Experience for the home includes its “84-inch 4K LED TV, the video player, and an Xperia Tablet S that serves as a remote control through an easy-to-use app.”

Philips Offers Smartphone-Controlled Lighting

Philips Lighting is launching a network-enabled lighting-control system available only through Apple stores.

The system, called hue, is positioned as the world’s first Web-enabled LED home lighting system sold direct to consumers. It lets users control LED light bulbs from iOS and Android apps on smartphones and tablets when inside the home or from afar.

Offered exclusively through Apple stores beginning Oct. 30, the $199 hue starter kit includes three LED bulbs, which fit into any standard light fixture, and a ZigBee-based wireless bridge that connects to a home’s existing wireless router. From the app, consumers can remotely control home lighting, personalize their lighting experience with custom settings, and program timers.

Additional bulbs cost $59.

Hue controls up to 50 LED light bulbs via the open ZigBee LightLink wireless standard, with individual control over each bulb. Users can save personal light settings and recall them from a smart device. Hue also includes four pre-programmed light settings that adjust bulbs to an optimum shade and brightness of white light for such scenarios as relaxing, reading or boosting mood and energy, the company said.

Users can also set each bulb to emit a different color from among more than 16 million colors.

Using the ZigBee LightLink standard, hue bulbs create a mesh network so that the bulbs can get a ZigBee command even if far from the home’s ZigBee bridge. The standard lets the system use significantly less stand-by power than Wi-Fi, Philips added.

Hue can be integrated with other ZigBee-based systems such as motion sensors and home thermostats for additional home automation, Philips noted. Software updates for the bulbs are done automatically via the bridge and the bulbs themselves for future-proofing.

In the future, Philips plans to integrate hue with sound and video systems and develop geo-location services, which enable hue to turn on or off home lights when a user gets close to home or leaves.

Philips is also researching the addition of “ reverse indicators,” enabling hue to issue alerts that lighting has not been turned on during a specific time period. The feature would be useful in elder-care situations, the company said.

Philips will make a hue interface and software development kit (SDK) available to anyone who wants to create additional functionality or applications that interact with the system. The applications will be tested by the Philips “to ensure they are viable,” the company said.

With LED lights, Philips said, LED semiconductors can be easily integrated into electronic circuitry to deliver new lighting options at the command of an electrical signal. These smart bulbs have a unique web address.

Stewart Debuts Rear Projection Screen That Adheres to Glass

Dubbed Mystik!, Stewart’s latest screen material is actually a self-adhesive projection material designed for use in digital signage applications. Mystik! is ideal as a storefront application, as well as for other retail and public venues when a two-piece projection solution is desired. It can also be applied to any window or glass door to transform the surface into an opaque projection screen, enabling privacy while also creating a fun home entertainment space.


Savant Debuts Video Tiling Technology for iPads

Savant Systems has announced something it’s calling SmartView Tiling, a technology enabling a single display to show several video sources simultaneously. From an iPad, users will be able to drag and drop selected sources to their chosen locations within the tile grid, pinch and zoom to have any source take over the entire display and create custom tiling layouts and channel presets for easy recall.
 
SmartView Tiling will accept any video input and supports up to six sources in resolutions up to 1080p. The video processing and scaling upconverts all sources and delivers the video via an HDMI output.


Integra Debuts 9.4 Network AV Receiver

Integra will complete the roll-out of its 2012 audio video receiver lineup at CEDIA EXPO 2012 with the introduction of its DTR-70.4 THX Ultra2 Plus 9.2-channel network audio-video receiver with the 11.1-channel capabilities of DTS Neo:X, using preamp outputs for the extra channels. 

Other new features include InstaPreview, a variant of picture-in-picture for HDMI sources, and Mobile High-definition Link (MHL) to deliver video from Android smart devices and Roku’s new Streaming Stick. Advance custom installation features include Zone 2 HDMI, powered Zones 2, 3 and 4, and Audyssey MultEQ XT32. 

The company is also announcing its new DMI-40.4 Dock for iPod/iPhone/iPad with Airplay, network capability, and compatibility with Crestron eControl and AMX Duet. The DMI-40.4 can use its RI link to provide Airplay, WiFi, and remote control capabilities to all RI compatible Integra AVRs.

Integra will also debut its ADM-20.4, a 75-Watt two-channel power amplifier that is ideal for remote Zone applications or those extra channels for DTS Neo:X.

Integra will be showing its full line at CEDIA 2012. These include the DTR-20.4, DTR-30.4, DTR-40.4, and DTR-50.4 Network AV receivers, and DTM-40.4 network stereo receiver, which were introduce to dealers earlier this year. 

The Integra DTR-70.4 comes comes with the quality assurance of THX Ultra2 Plus Certification, and implements the full 11.1-channel capabilities of DTS Neo:X. With DTS Neo:X processing, it provides every available surround option up to 11.1 channels, including height plus wide configurations. Channels 10 and 11 use the preamp outputs connected to an external two-channel power amplifier. Audyssey’s top-of-the-line MultEQ XT32 is included to provide automated room set-up equalization to achieve the ideal level and time delay for each speaker, with multi-channel upmixing from DTS Neo:X, Audyssey DSX, and Dolby Pro Logic IIz. 

With its nine HDMI ports, front-panel HDMI/MHL port, dual USB connections, Ethernet, optional wifi and Bluetooth adaptors, and free remote control and streaming Apps for iPhone, Android, and Kindle, the Integra DTR-70.4 can interface with just about any new technology, the company says. Music stored on iPod/iPhone, Android, and many other devices can be streamed directly to the DTR-70.4. The front-panel MHL-enabled HDMI port can stream video from Android devices and Roku’s new Streaming Stick, with other devices on the technology horizon. With Ethernet for access to preloaded audio streaming channels such as Spotify, and connectivity for smart phones, tablets, and PC via DLNA or Bluetooth, this receiver is designed for seamless integration into users’ digital lifestyles and to distribute entertainment throughout the home. 

Connectivity has also been enhanced by adding Zone2 HDMI that removes the need for a secondary analog connection in order to access audio in a second zone. Powered audio is available in four zones simultaneously—with multi-zone playback and setting controls managed by remote app.

Squeezebox is Backbone of New Multiroom Audio System from Fusion

image

Long known for its movie servers, Fusion will debut the Ovation Music Streamer (OMS), an audio-only solution for streaming music to as many as five zones.

For this product, Fusion didn’t reinvent the wheel. Rather, the company built this box around the popular Squeezebox audio system from Logitech.

“As we began architecting our own audio streamer system, we came across Squeezebox and all the other open source products built around it,” says Fusion VP of sales Ingo Schmoldt “It seemed an ideal base upon which to build because there are tons of users vetting the GUIs, and of course there are a host of free drivers and apps available for all the major automation companies and mobile devices.”

Indeed, many CE pros already use Squeezebox and other cheap consumer devices in their fancy A/V racks – obviously not an ideal solution with the lack of margin, special rack kits, and multiple boxes with separate IP addresses for integrating with home control systems.

“They all say they want a more integration-friendly product — one that isn’t available everywhere on the Web and actually allows them to make some decent margin,” Schmoldt says.

Check out more CEDIA coverage at CEPro.com/cedianews!

He adds that plenty of other vendors make excellent multiroom streaming products for the custom channel, but dealers “all seemed to say that they’re way too expensive.”

Ovation streamers start at $995 for the OMS1, which supports three analog zones, and tops out at $1795 for the OMS3, which supports up to five zones (four analog, one digital). The top model features a fanless chassis with a 1TB hard drive and a CD drive for ripping music (FLAC and MP3 simultaneously). In the middle is the $1,295 OMS2, which supports three zones (two analog and one digital) and offers 500 GB of internal storage.

All units support 96kHz/24-bit HD digital audio playback and most of the major file formats including Apple lossy, Apple Lossless (AAC & ALAC), MP3, OGG Vorbis, WMA and FLAC.

The units are designed to be Squeezebox compatible, meaning integrators can take advantage of existing drivers from home automation vendors, and utilize all the major mobile-device apps currently available.

Currently, two-way drivers are available for Savant Systems, RTI and Elan, but a Control4 driver is on the way, thanks to Kevin Luther of Blackwire Designs.

“We were brought in to develop a driver to allow Control4 to give the user two-way feedback from the Fusion product to every C4 interface including touchpanels, mobile devices and apps,” Luther says. “I have personally been using the product in my own home with a Control4 system and I find myself using it every single day. At this price point I think this product is guaranteed to fill a real need in the industry.”

He adds, “The entire line seems incredibly cheap and should be able to be spec’d into almost any multizone project.”

And, before you ask … no wireless.